Heavy Duty Floor Seals

Garage Door Weatherstrips - Heavy Duty Floor Seals (1 item)
Heavy Duty Grade Floor seals
Heavy Duty Floor SealsGarage Doors see also: Spare Parts  Remote Control Systems 
(You can select other pages from the menu on the left, or click a tab above to change section.)
Weather Stop Commercial / Garage Grade Threshold Seal Kit

code: WSCGRFS
Weather Stop Commercial / Garage Grade Threshold Seal Kit
This is from Commercial & Domestic Grade Floor Seals
Weather Stop Floor Seal 6' 6" Length KIT £124.95£94.95
Weather Stop Floor Seal 8' 2" Length KIT £134.95£104.95
Weather Stop Floor Seal 9' 8" Length KIT £144.95£114.95
Weather Stop Floor Seal 13'-1" Length KIT £154.95£124.95
Weather Stop Floor Seal 14' 8" Length KIT £189.95£159.95
Weather Stop Floor Seal 16' 4" Length KIT £209.95£179.95
Weather Stop Floor Seal 18' 0" Length KIT £221.95£191.95
Weather Stop Floor Seal 19' 7" Length KIT £235.95£205.95
Weather Stop Floor Seal 26' 2" Length KIT £309.95£279.95
Weather Stop Floor Seal 29' 5" Length KIT £325.95£295.95
Tapcon 6mm x 180mm Drill Bit £12.95£9.95

Weather Stop® Commercial / Garage Threshold Seal Kit Includes:

  • Aluminium Section(s) to fit the aperture
  • Two bottom rubber seals 
  • One black & yellow rubber inset
  • Tapcon Dome Head Fixings (60mm) approximately 3 per 600mm
  • Drive Style T30 hex socket head for an electric screwdriver
  • Fitting Instructions (for appropriate aperture size) 

Key Product Features:

  • prevents water, leaves, dust and debris from being blown under commercial shutters / garage doors
  • incorporates two continuous rubber seals that run along the bottom of both sides of the aluminium section(s) creating a tight seal once the threshold  is secured to the floor
  • requires no sealant, fixing screws provided
  • features concealed screws that prevents  wear and tear
  • suitable for apertures up to 9 metres
  • seals gaps of up to 25mm high
  • prevents heat from escaping underneath the shutter/door   
  • is quick and easy to fit with pre-drilled holes
  • may be fitted to new or existing commercial shutters, domestic roller doors, sectional doors and up- and -over doors
  • is designed and manufactured in the United Kingdom
  • is manufactured in aluminium to allow easy access into premises by hand pallet trucks, forklifts and other large vehicles 
  • is robust, durable and suitable for commercial use
  • provides a viable alternative to fitting an aqua grid
  • may be fitted in all weather conditions
  • may be removed if required
  • is specifically designed to address health and safety issues  
Table 1. The three aluminium sections available
2 Metres (6'6") Kit (including fixings)  
2.5 Metres (8'2") Kit (including fixings)   
3 Metres (9'8") Kit (including fixings)  
     
Table 2. The combinations of aluminium sections supplied
  Length of threshold Combination of aluminium sections
4 Metres (13'1") Kit (including fixings) 2 x 2 Metre lengths
4.5 Metres (14'8") Kit (including fixings) 1 x 2 Metre & 1 x 2.5 Metre length
Metres (16'4") Kit (including fixings) 2 x 2.5 Metre lengths
5.5 Metres (18'0") Kit (including fixings) 1 x 2.5 Metre & 1 x 3 Metre length
6 Metres (19'7") Kit (including fixings) 2 x 3 Metre lengths
8 Metres (26'2") Kit (including fixings) 1 x 2 Metre & 2 x 3 Metre lengths
9 Metres (29'6") Kit (including fixings) 3 x 3 Metre lengths


Supplied with continuous lengths seal

Rubber Seals

The two rubber seals run beneath both wings of the aluminium section(s) creating a tight seal when the threshold is secured to the floor. A watertight seal is formed when the screws are tightened. This stops water from coming in under the threshold seal.

Vertical legs extend downwards from the underside of the threshold. These legs or projections make contact with the floor when the threshold is compressed. 

The vertical legs may serve to disperse pressure on the threshold seals and thereby prevent or inhibit the over-compression of the two bottom seals.

Continous seals for all lengths 

The aluminium threshold may be joined together to suit the width of the opening to which it is to be fitted. Different lengths of threshold may be butted together but continuous lengths of top and bottom seal ensure a watertight seal.  

The threshold seal installation steps

  • Measure the aperture and cut the threshold and seals to size
  • Positioning the threshold ramp plate between the jambs of the doorway
  • Marking and drilling screw holes onto the floor and
  • Driving the screws into the floor thereby compressing the bottom seals until the lower edges of the spacer edges contact the floor.
weatherstop floor seal

 You are currently viewing
 Garage Door Weatherstrips > Heavy Duty Floor Seals


See also:
Brush/Rubber Seal Weatherstrips
Garage Door Floor Seals
Domestic Grade Top Seals

Would you like to receive email updates on our latest products and special offers? If so, please click here.

  Go to Top of 'Heavy Duty Floor Seals' page